Overview: Designed for charging 3.7V Li-Ion and Polymer Li-Ion Battery Packs with capacity more than 1500 mAh.

Input Voltage: 110-240V AC.

Output Voltage: 1.5A Maximum charging current.

Charging will be cut off automatically when battery fully charged.

Charging Mode: CCCV ( Constant Current – Constant Voltage )

Constant Current, then Constant Voltage at 4.2V and charging cut-off when current reduces to zero.

Charging Condition Indication: Charging: Red LED, Fully Charged: Green LED, Standby: Green LED

Adapter Cables: Two Molex Pico and Molex KK adapter cables to connect the charger to any SANAV battery pack.

Dimensions: 1.5" x 1" x 3" (38.1 x 25.4 x 76.2mm)

Weight: 2.7oz (76.54g)

INPUT

Voltage Range

110V-240V AC

Frequency

50Hz-60Hz

Current

1A

Inrush Current

115V/40A(max.), 230V/80A(max.)

At 25°C at cold start.

Power Efficiency

70% (min.) at full load, 110V AC or 230V AC 50Hz.

OUTPUT

Voltage:4.2V +/-1.0% at Standby

Max Current: 1500mA

Charge Curve

Constant Current – Constant Voltage

Charging Indication

Standby: Green LED

Charging: Red LED

Full Charge: Green LED

(Note: When charging complete, charge current drops to 150+/-15mA).

PROTECTION

Over Voltage Protection

Output over voltage protection with Zener diode.

Short Circuit Protection

After output is shorted to ground, auto-recovery without damage.

Hi-Potential Insulation Shock Protection

3000V AC for 1 min with current < 10mA

PHYSICAL

Dimensions

75mm x 46mm x 29 mm

ENVIRONMENTAL

Ambient Operation Temperature

0°C to +40°C

Ambient operation relative humidity

20% to 85%

Ambient storage temperature

-40°C to +70°C

Ambient storage relative humidity

10% to 95%

Drop Test

Freely drop twice from height of 75cm per side (front/back/left/right).

Vibration Test

Vibration frequency: 5-60-5Hz with 10 octave/min@ 2.1G

Three circles per axis (X,Y,Z) for 10 mins

MTBF

40,000 hrs (Bellcore TR332 @ 25°C).